PS-203: Dual Display TDS Controller
PS-203: Dual Display TDS Controller
The PS-203 is a dual-display TDS controller designed for continuous and simultaneous monitoring and control of two water lines in high-output commercial water treatment systems.
Key Features
- Simultaneously monitors two water lines
- Monitors feed and product water TDS
- Large, bright 4-digit LED displays
- High-level TDS alarm
- Includes two 1/2" sensor probes
- Suitable for high-output commercial water treatment systems
Specifications
| Range | 0-9999 ppm |
|---|---|
| Accuracy | ±2% |
| Conversion Factor | NaCl (avg. 0.5) |
| Resolution | 0.1 ppm (0-99.9), 1 ppm (100-9999) |
| ATC | Yes (1-60°C) |
| Calibration | Up and Down push-button digital calibration |
| Setting | Controlled by on-screen up/down buttons |
| Relay Switching Electrical Specification | 5A, 250VAC |
| Alarm | Optional steady beep, set by user, one for each set point |
| Probe | 1/2" NPTF |
| Cable Length | 3 m (9.8 ft.) shielded cable |
| Display | 4-digit bright FND dual displays |
| Power Source | AC 110V/230V, +10% VAC; 50/60Hz |
| Dimensions | 9.6 × 9.6 × 12.6 cm (3.78 × 3.78 × 4.96 in.) |
| Monitor Weight | 476 g (1 lb 0.8 oz) |
Documents
FAQs
Shipping & Returns
Orders are processed and shipped according to our Shipping Policy. For products requiring special handling or lead times, our team will provide the relevant information before dispatch.
Warranty Details
Please review our Return & Refund Policy before placing your order. Products are generally not eligible for return or refund, except where specifically required under the applicable policy.
Unless explicitly stated on the individual product page or quotation, products are supplied without warranty. Please refer to our Warranty Terms for further details.
Shop The Full Collection
AP-1: AquaPro Water Quality Tester (TDS)
AP-1: AquaPro Water Quality Tester (TDS)
