PSC-50

PSC-50: TDS/EC Controller

The PSC-50 controller has a maximum set point to help maintain a limit of TDS/EC allowed in the water. When the measuring water exceed the TDS/EC level, the alarm and relay will turn on. If the TDS/EC level drops below the set point, the controller deactivate the alarm and switch the relay contacts back to the normal position.

Features

Large, bright L.E.D. display
An alarm will sound if the TDS /EC level rises above the user-set level
A switch will control a device based on the set point
On-screen temperature display (C/F)
Includes one sensor probe (part #SP-1-PSC)

Specifications

EC Range: 0-9999 µS / 0-20.00 mS
TDS Range: 0 – 5000 ppm / 0-10.00 ppt
Accuracy: ±2% (of the reading)
Conversion Factor: NaCl (avg. 0.5)
Resolution: 0.1 (0-99.9); 1 (100-9999); 0.01 (mS & ppt)
ATC: Yes (1 – 60°C)
Calibration: Digital by push buttons
Set-Point: Single point, controlled by on-screen up/down buttons (to any point within the range)
Relay Control: 1 point relay setting. Trigger relay when detects exceed value.
Relay Switching Electrical Specification : 5A, 250VAC
Alarm: Optional steady beep (set by user)
Display: Bright 2.3″ LED
Cable: 3 meter (9.8 ft) shielded cable
Power Source: AC 110V / AC 220V
Dimensions: 9.6 x 4.8 x 10 cm (3.8 x 1.9 x 3.9 in.)
Monitor Weight: 261 g (9.2 oz)

PSC-50: TDS/EC Controller

Features

Specifications

Related products

PSC-64D

PSC-54

PSC-50

PPH-1000

CIC150-N CIC-150-4

CIC-152-N CIC-152-4